Reviews – WARNING – Does This Work?

How to extend the car Reviews usage time

The Reviews is the heart of the car. How to keep the Reviews youthful is the key to car maintenance. First of all, pay attention to the maintenance of the new car running-in period, which is the basis for extending the service life of the Reviews. In addition, beware of the common problems of the Reviews: 1. The Reviews wear

is a cold start (that is, the Reviews is stopped for more than 6 hours), at the moment of starting Dry wear occurs, and the damage to the car Reviews is greatest. Another situation is that the Reviews runs at high speed and the Reviews oil is relatively thin. At this time, the car Reviews is in a semi-dry state. This situation cannot be ignored.

2. Deficit oil phenomenon

This situation is caused by a gap between the combustion chamber and the cylinder, causing the oil to enter the combustion chamber. The way to find that the car Reviews has the phenomenon of heating oil is to first check whether the exhaust pipe emits blue smoke. When the hand reaches the exhaust pipe and probes it, it smells whether the finger has organic oil taste. If there is taste, it proves that the organic Reviews in the car Reviews is defective. Into the combustion chamber.

3. Oil seal ring aging

The oil seal ring is aging, the oil will be slowly leaked out. For the phenomenon of lightly burning the oil, adding a certain amount of repair agent when changing the oil can be solved, but if the situation is serious, the car Reviews needs to be disassembled.

To maintain the Reviews of the car, it is necessary to change the oil regularly and change the three filters. In addition, it should be observed and inspected in peacetime, and the faults should be eliminated in time to ensure that the Reviews is always in good technical operation. You can observe the following points:

1. Frequently check the fastening parts.

Diesel Reviews or gasoline Reviews is affected by vibration shock and uneven load during use. Bolts and screws are easy to loosen, and adjustment bolts of various parts should be carefully checked to avoid damage to parts due to looseness. Valve clearance, valve timing, fuel supply advance angle, injection pressure and ignition timing should be checked and adjusted in time to ensure that the Reviews is always in good technical condition. This will save fuel and extend the life of the Reviews.

2. Keep the oil net, water net, gas net, and the body’s net

fuel oil impure, which will make the precision matching machine wear and increase the matching gap, resulting in oil leakage, oil drop, power supply pressure reduction, gap increase, and even oil path. If the air contains a lot of dust, it will accelerate the wear of the cylinder liner, piston and piston ring. If the cooling water is not pure, the scale of the cooling system will increase, which will hinder the heat dissipation of the Reviews and lubrication conditions. Deterioration, the wear of the machine is serious; if the external surface of the machine is not clean, the body will be corroded and the service life will be shortened.

3. Ensure that the oil, water,

and air is not available or interrupted, and there will be difficulties in starting, burning, power reduction, and abnormal operation of the Reviews; if the oil supply is insufficient or interrupted, it will also The Reviews is poorly lubricated, the parts are worn out seriously, and even the burning of the tiles occurs. When the cooling water is insufficient, the temperature is too high, the power is reduced, the wear is intensified, and the service life is reduced.